Tutorial Linksys PAP2T adapter
To configure your Hivoox line with the adapter, we recommend the following.
1 - Connect the Ethernet network cable to the Ethernet port of the Linksys PAP2T and connect the other end of the cable to the Ethernet port of the router or internet modem.
2 - Connect your phone to the PHONE 1 port of the Linksys Adapter.
3 - If you have 2 Hivoox accounts or a fax, connect the second telephone or fax to the PHONE 2 port of the Telephone Adapter.
First, you must know the IP address of the adapter. To know this IP address, use your telephone connected to the adapter to dial **** 110, and listen to the IP address that will be communicated in English. Be careful to write down this address.
Then enter this address in the web browser (Example: 192.168.1.2)
Once the page is opened, click on the top right ADMIN LOGIN.
Then on LINE 1
In the VOICE column on the left of the screen, find:
PROXY AND REGISTRATION: enter “sip.hivoox.com” in the indicated field.
SUBSCRIBER INFORMATION and enter:
Display name: your sip user of hivoox 8780xxxxxxxx
User ID: 8780xxxxxxxx
Password: your sip password
Then find AUDIO CONFIGURATION and PREFERED CODEC, select G711u.
Then click on SAVE SETTING.
Wait a few minutes and you will see the light phone 1 on your adapter.
You can make calls now.
There are no comments yet